Test Catalog

Test Id : MYCON

Not Orderable

Mycoplasma pneumoniae Antibody Interpretation

Download
Overview

Test Catalog

Useful For
Suggests clinical disorders or settings where the test may be helpful

Interpretation for Mycoplasma pneumoniae screening results

Method Name
A short description of the method used to perform the test

Only orderable as part of a profile. For more information see MYCO / Mycoplasma pneumoniae Antibodies, IgG and IgM, Serum.

 

Technical Interpretation

NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.

Yes

Reporting Name
Lists a shorter or abbreviated version of the Published Name for a test

M. pneumoniae Ab Interpretation

Aliases
Lists additional common names for a test, as an aid in searching

M. pneumoniae

Mycoplasma Serology

Specimen Type
Describes the specimen type validated for testing

Serum

Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing

Only orderable as part of a profile. For more information see MYCO / Mycoplasma pneumoniae Antibodies, IgG and IgM, Serum.

Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected

 

Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included

Specimen Type Temperature Time Special Container
Serum Refrigerated (preferred) 14 days
Frozen 14 days

Useful For
Suggests clinical disorders or settings where the test may be helpful

Interpretation for Mycoplasma pneumoniae screening results

Clinical Information
Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test

Mycoplasma pneumoniae is a small bacterium transmitted via organism-containing droplets. It is a cause of upper respiratory infection, pharyngitis, and tracheobronchitis, particularly in children, and has been associated with approximately 20% of cases of community-acquired pneumonia. Central nervous system and cardiac manifestations are probably the most frequent extrapulmonary complications of infections due to M pneumoniae. The disease is usually self-limited, although severe disease has been reported in immunocompromised patients.

 

Identification of M pneumoniae by culture-based methods is time consuming and insensitive. Serology-based assays for M pneumoniae have several drawbacks. The development of IgM antibodies takes approximately 1 week, and the IgM response may be variable in adults or decreased in immunosuppressed individuals. Confirmation of the disease is dependent on the observation of a 4-fold rise in IgG antibody titers between acute and convalescent specimens, several weeks following the initial onset of illness, providing clinical utility only for retrospective testing. Real-time polymerase chain reaction analysis offers a rapid and sensitive option for detection of M pneumoniae DNA from clinical specimens allows for diagnosis of acute or current infection.

Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.

Only orderable as part of a profile. For more information see MYCO / Mycoplasma pneumoniae Antibodies, IgG and IgM, Serum.

 

Negative

Interpretation
Provides information to assist in interpretation of the test results

IgG ELISA result

IgM ELISA result

Interpretation

Positive

Negative

Results suggest past exposure.

Positive

Reactive

Prior exposure to Mycoplasma pneumoniae detected. Confirmatory testing for IgM to M pneumonia will be performed by an immunofluorescence assay.

Equivocal

Negative

Negative

No antibodies to M pneumoniae detected. Acute infection cannot be ruled out as antibody levels may be below the limit of detection. If clinically indicated, a second serum should be submitted in 14 to 21 days.

Negative

Reactive

No prior exposure to Mycoplasma pneumoniae. Confirmatory testing for IgM to M pneumonia will be performed by an immunofluorescence assay.

Equivocal

Equivocal

Negative

Recommend follow-up testing in 10 to 14 days if clinically indicated.

Equivocal

Reactive

Confirmatory testing for IgM to M pneumonia will be performed by an immunofluorescence assay.

Equivocal

 

ELISA = Enzyme-linked immunosorbent assay

Cautions
Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances

A diagnosis of Mycoplasma pneumoniae infection should not be solely based on results of serologic testing for this agent. Test results should be interpreted in conjunction with clinical evaluation and the results of other diagnostic procedures (eg, molecular detection).

 

The continued presence or absence of antibodies cannot be used to determine the success or failure of therapy.

 

Testing should not be performed as a screening procedure for the general population. Testing should only be done when clinical evidence suggests the diagnosis of M pneumoniae-associated disease.

 

The performance of this test has not been established on neonates and immunocompromised patients.

 

Performance of the IgM assay has not been tested with specimens known to be positive for antibodies to organisms that are known to be associated with lower respiratory illness (ie, influenza A and B, cytomegalovirus, Chlamydophila pneumoniae, parainfluenza), and closely related serovars known to cross-react with M pneumoniae, such as Mycoplasma genitalium and Mycoplasma hominis, as well as various Ureaplasma species. Cross-reactivity studies with such organisms have not been performed with this assay.

 

The IgG removal system included with the IgM test system has been shown to functionally remove the IgG from specimens containing total IgG levels ranging from 300 to 600 mg/mL. The effectiveness of this removal system at IgG levels exceeding 600 mg/mL has not been established.

Clinical Reference
Recommendations for in-depth reading of a clinical nature

1. Smith T: Mycoplasma pneumoniae infections: diagnosis based on immunofluorescence titer of IgG and IgM antibodies. Mayo Clin Proc 1986;61(10):830-831

2. Holzman RS, Simberkoff MS, Leaf HL: Mycoplasma pneumoniae and atypical pneumonia. In: Bennett JE, Dolin R, Blaser MJ, eds. Mandell, Douglas, and Bennett's Principles and Practice of Infectious Diseases. 9th ed. Elsevier; 2020:2332-2339

Method Description
Describes how the test is performed and provides a method-specific reference

Automated interpretation of IgM and IgG antibody results for Mycoplasma pneumoniae.

PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information

No

Day(s) Performed
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.

Monday through Friday

Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.

Same day/1 to 3 days

Performing Laboratory Location
Indicates the location of the laboratory that performs the test

Rochester

Fees
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.

  • Authorized users can sign in to Test Prices for detailed fee information.
  • Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
  • Prospective clients should contact their account representative. For assistance, contact Customer Service.

Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.

Not Applicable

LOINC® Information
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.

Test Id Test Order Name Order LOINC Value
MYCON M. pneumoniae Ab Interpretation In Process
Result Id Test Result Name Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
MYCON M. pneumoniae Ab Interpretation 69048-7

Test Setup Resources

Setup Files
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.

Excel | Pdf

Sample Reports
Normal and Abnormal sample reports are provided as references for report appearance.

Normal Reports | Abnormal Reports

SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.

SI Normal Reports | SI Abnormal Reports